.. include:: .. _off-season-recovery: Recovery Procedure ====================== In the event you are unable to access your AP that has been flashed with the FRC OpenWRT firmware, there is a recovery procedure available to boot to the backup partition. This will restore all settings to the image defaults (as described in :doc:`Default Settings ` ) which should allow you to access the device again. Recovery -------- #. Power off router with power switch. #. Turn power back on and Power LED will light. As soon as all LEDs turn off (~2s), power off router with power switch * As soon as all LEDs turn off (~2s), power off router with power switch #. Turn power back on and Power LED will light. As soon as all LEDs turn off (~2s), power off router with power switch * As soon as all LEDs turn off (~2s), power off router with power switch #. Turn power back on and Power LED will light. As soon as all LEDs turn off (~2s), power off router with power switch * As soon as all LEDs turn off (~2s), power off router with power switch #. Turn power back on and allow router to fully boot. It should now be booted to the alternate firmware partition * It should now be booted to the alternate firmware partition